SCHOLARS@TAMU

Beyabanaki, E., Eftekhar Ashtiani, R., Feyzi, M., & Zandinejad, A. (2021). Evaluation of Microshear Bond Strength of Four Different CAD‐CAM Polymer‐Infiltrated Ceramic Materials after Thermocycling. Journal of Prosthodontics.

Khanlar, L. N., Abdou, A., Takagaki, T., Mori, S., Ikeda, M., Nikaido, T., Zandinejad, A., & Tagami, J. (2021). The effects of different silicatization and silanization protocols on the bond durability of resin cements to new high-translucent zirconia. Clinical Oral Investigations. 1-15.

Nasiry Khanlar, L., Revilla-León, M., Barmak, A. B., Ikeda, M., Alsandi, Q., Tagami, J., & Zandinejad, A. (2021). Surface roughness and shear bond strength to composite resin of additively manufactured interim restorative material with different printing orientations. The Journal of Prosthetic Dentistry.

Zandinejad, A., Revilla-León, M., Methani, M. M., Nasiry Khanlar, L., & Morton, D. (2021). The Fracture Resistance of Additively Manufactured Monolithic Zirconia vs. Bi-Layered Alumina Toughened Zirconia Crowns When Cemented to Zirconia Abutments. Evaluating the Potential of 3D Printing of Ceramic Crowns: An In Vitro Study. Dentistry Journal. 9(10), 115-115.

Khanlar, L. N., Salazar Rios, A., Tahmaseb, A., & Zandinejad, A. (2021). Additive Manufacturing of Zirconia Ceramic and Its Application in Clinical Dentistry: A Review. Dentistry Journal. 9(9), 104-104.

Zandinejad, A., Das, O., Barmak, A. B., Kuttolamadom, M., & Revilla‐León, M. (2021). The Flexural Strength and Flexural Modulus of Stereolithography Additively Manufactured Zirconia with Different Porosities. Journal of Prosthodontics.

Mostafavi, D., Methani, M. M., Piedra-Cascón, W., Zandinejad, A., & Revilla-León, M. (2021). Influence of the Rinsing Postprocessing Procedures on the Manufacturing Accuracy of Vat-Polymerized Dental Model Material.. J Prosthodont. 30(7), 610-616.

Zandinejad, A., & Revilla-León, M. (2021). Additively Manufactured Dental Crown with Color Gradient and Graded Structure: A Technique Report.. J Prosthodont. 30(9), 822-825.

Revilla-León, M., Piedra-Cascón, W., Aragoneses, R., Sadeghpour, M., Barmak, B. A., Zandinejad, A., & Raigrodski, A. J. (2021). Influence of base design on the manufacturing accuracy of vat-polymerized diagnostic casts: An in vitro study.. J Prosthet Dent.

Revilla-León, M., & Zandinejad, A. (2021). Two-layer additively manufactured crown: Proof of concept.. J Dent. 112, 103730-103730.

Zandinejad, A., Liang, H., Fisher Cosio, N. A., & Revilla-León, M. (2021). Fabrication of a complete-arch implant-supported fixed interim prosthesis by using a cone beam computed tomography digital scan for a patient with primordial dwarfism: A dental technique.. J Prosthet Dent.

Mostafavi, D., Methani, M. M., Piedra-Cascón, W., Zandinejad, A., Att, W., & Revilla-León, M. (2021). Influence of the polymerization post-processing procedures on the accuracy of additively manufactured dental model material.. Int J Prosthodont.

Mosier, M., Barmak, B. A., Gómez-Polo, M., Zandinejad, A., & Revilla-León, M. (2021). Digital and analog vertical dimension measurements: A clinical observational study.. Int J Prosthodont. 34(4), 419-427.

Revilla-León, M., Mostafavi, D., Methani, M. M., & Zandinejad, A. (2021). Manufacturing accuracy and volumetric changes of stereolithography additively manufactured zirconia with different porosities.. J Prosthet Dent.

Revilla-León, M., Ashby, M. T., Meyer, M. J., Zandinejad, A., & Umorin, M. (2021). Self-perception and self-representation preference between 2-dimensional and 3-dimensional facial reconstructions among dentists, dental students, and laypersons.. J Prosthet Dent.

Revilla-Len, M., Jordan, D., Methani, M. M., Piedra-Cascn, W., zcan, M., & Zandinejad, A. (2021). Influence of printing angulation on the surface roughness of additive manufactured clear silicone indices: An invitro study.. J Prosthet Dent. 125(3), 462-468.

Revilla-Len, M., Smith, Z., Methani, M. M., Zandinejad, A., & zcan, M. (2021). Influence of scan body design on accuracy of the implant position as transferred to a virtual definitive implant cast.. J Prosthet Dent. 125(6), 918-923.

Revilla-Len, M., Fountain, J., Piedra-Cascn, W., zcan, M., & Zandinejad, A. (2021). Workflow of a fiber-reinforced composite fixed dental prosthesis by using a 4-piece additive manufactured silicone index: A dental technique.. J Prosthet Dent. 125(4), 569-575.

Revilla-León, M., Abaei, D. S., Tittle, A., & Zandinejad, A. (2021). Additively manufactured implant abutment screw-access guide to remove a cement-retained implant crown: A technique.. J Prosthet Dent. 127(2), 219-222.

Ashtiani, R. E., Tehrani, S., Revilla-León, M., & Zandinejad, A. (2020). Reducing the Risk of COVID-19 Transmission in Dental Offices: A Review.. J Prosthodont. 29(9), 739-745.

Gonzalez, A. M., Piedra-Cascón, W., Zandinejad, A., & Revilla-León, M. (2020). Fiber-reinforced composite fixed dental prosthesis using an additive manufactured silicone index.. J Esthet Restor Dent. 32(7), 626-633.

Revilla-Len, M., Raney, L., Piedra-Cascn, W., Barrington, J., Zandinejad, A., & zcan, M. (2020). Digital workflow for an esthetic rehabilitation using a facial and intraoral scanner and an additive manufactured silicone index: A dental technique.. J Prosthet Dent. (4),

Revilla-Len, M., Fogarty, R., Barrington, J. J., Zandinejad, A., & zcan, M. (2020). Influence of scan body design and digital implant analogs on implant replica position in additively manufactured casts.. J Prosthet Dent. (2),

Revilla-Len, M., Jiang, P., Sadeghpour, M., Piedra-Cascn, W., Zandinejad, A., zcan, M., & Krishnamurthy, V. R. (2020). Intraoral digital scans-Part 1: Influence of ambient scanning light conditions on the accuracy (trueness and precision) of different intraoral scanners.. J Prosthet Dent. (3),

Revilla-Len, M., Jiang, P., Sadeghpour, M., Piedra-Cascn, W., Zandinejad, A., zcan, M., & Krishnamurthy, V. R. (2020). Intraoral digital scans: Part 2-influence of ambient scanning light conditions on the mesh quality of different intraoral scanners.. J Prosthet Dent. (5),

Revilla-Len, M., Meyers, M. J., Zandinejad, A., & zcan, M. (2019). A review on chemical composition, mechanical properties, and manufacturing work flow of additively manufactured current polymers for interim dental restorations.. J Esthet Restor Dent. (1),

Zandinejad, A., Methani, M. M., Schneiderman, E. D., Revilla-Len, M., & Bds, D. M. (2019). Fracture Resistance of Additively Manufactured Zirconia Crowns when Cemented to Implant Supported Zirconia Abutments: An in vitro Study.. J Prosthodont. 28(8), 893-897.

Revilla-Len, M., Meyer, M. J., Barrington, J. J., Sones, A., Umorin, M. P., Taleghani, M., & Zandinejad, A. (2019). Perception of occlusal plane that is nonparallel to interpupillary and commissural lines but with the maxillary dental midline ideally positioned.. J Prosthet Dent. 122(5), 482-490.

Revilla-Len, M., Fountain, J., Piedra-Cascn, W., Zandinejad, A., & zcan, M. (2019). Silicone Additive Manufactured Indices Performed from a Virtual Diagnostic Waxing for Direct Composite Diastema Closure Combined with Resin Infiltration Technique on White Spot Lesions: A Case Report.. J Prosthodont. (8),

Revilla-Len, M., Fountain, J., Piedra Cascn, W., zcan, M., & Zandinejad, A. (2019). Workflow description of additively manufactured clear silicone indexes for injected provisional restorations: A novel technique.. J Esthet Restor Dent. (3),

(2015). Maxillary and Mandibular Rehabilitation in the Esthetic Zone Using a Digital Impression Technique and CAD/CAM-fabricated Prostheses: A Multidisciplinary Clinical Report.. Oper Dent. 40(4), 350-356.

(2015). Predictable Restorative Work Flow for Computer-Aided Design/Computer-Aided Manufacture-Fabricated Ceramic Veneers Utilizing a Virtual Smile Design Principle.. Oper Dent. 40(4), 357-363.

(2015). Dental student perception and assessment of their clinical knowledge in educating patients about preventive dentistry.. Eur J Dent Educ. 19(2), 81-86.

(2015). Digital workflow for virtually designing and milling ceramic lithium disilicate veneers: a clinical report.. Oper Dent. 40(3), 241-246.

(2015). Virtually designed and CAD/CAM-fabricated lithium disilicate prostheses for an esthetic maxillary rehabilitation: a senior dental student clinical report.. J Prosthet Dent. 113(4), 282-288.

(2015). Complete oral rehabilitation of a patient with hereditary gingival fibromatosis: a clinical report.. J Prosthet Dent. 113(1), 1-7.

Metz, M., Lin, W., Miller, C., ZandiNejad, A., Abdel-Azim, T., & Morton, D. (2014). Resources for a Novel Laboratory Quality Assurance Program: Operating Procedures. MedEdPORTAL.

(2014). CAD/CAM-fabricated telescopic prostheses on periodontally compromised abutments of a patient undergoing intravenous bisphosphonate treatment for osteoporosis: a case report.. Gen Dent. 62(3), e1-e3.

(2014). Use of prefabricated titanium abutments and customized anatomic lithium disilicate structures for cement-retained implant restorations in the esthetic zone.. J Prosthet Dent. 111(3), 181-185.

(2014). Implementation of a laboratory quality assurance program: the Louisville experience.. J Dent Educ. 78(2), 195-205.

(2014). Use of digital data acquisition and CAD/CAM technology for the fabrication of a fixed complete dental prosthesis on dental implants.. J Prosthet Dent. 111(1), 1-5.

(2013). Additive manufacturing technology (direct metal laser sintering) as a novel approach to fabricate functionally graded titanium implants: preliminary investigation of fabrication parameters.. Int J Oral Maxillofac Implants. 28(6), 1490-1495.

(2013). Fabrication of a fixed multipurpose template retained by existing dental implants.. J Prosthet Dent. 110(2), 144-146.

(2006). The effect of ceramic and porous fillers on the mechanical properties of experimental dental composites.. Dent Mater. 22(4), 382-387.

Yang, L. i., Miyanaji, H., Janaki Ram, D., Zandinejad, A., & Zhang, S. (2019). Functionally Graded Ceramic Based Materials Using Additive Manufacturing: Review and Progress. SOL-GEL SYNTHESIS AND PROCESSING. Ceramic Transactions Series. 43-55. John Wiley & Sons, Inc..