10 Gb/s Adaptive Receive-Side Near-End and Far-End Crosstalk Cancellation Circuitry | Conference Paper individual record
abstract

© 2014 IEEE. As serial I/O data rates scale above 10 Gb/s, crosstalk between neighboring channels degrades system bit-error rate (BER) performance. This paper presents receive-side circuitry which merges the cancellation of both near-end and far-end crosstalk (NEXT/FEXT) and can automatically adapt to different channel environments and variations in process, voltage, and temperature. NEXT cancellation is realized with a novel 3-tap FIR filter which combines two traditional FIR filter taps and a continuous-time band-pass filter IIR tap for efficient crosstalk cancellation, with all filter tap coefficients automatically determined via an on-die sign-sign least-means-quare (SS-LMS) adaptation engine. FEXT cancellation is realized by coupling the aggressor signal through a differentiator circuit whose gain is automatically adjusted with a power-detection-based adaptation loop. A prototype fabricated in a general purpose 65-nm CMOS process includes the adaptive NEXT and FEXT circuitry, along with a continuous-time linear equalizer (CTLE) to compensate for frequency-dependent channel loss. Enabling the crosstalk cancellation circuitry while operating at 10 Gb/s over coupled 4-in FR4 transmission line channels with NEXT and FEXT aggressors opens a previously closed eye and allows for a 0.2 UI timing margin at a BER = 10-9. Total power including the NEXT/FEXT crosstalk cancellation circuitry, CTLE, and high-speed output buffer is 34.6 mW, and the core circuit area occupies 0.3 mm2.

author list (cited authors)
Min, B., Yang, N., & Palermo, S.
publication date
2014
publisher
IEEE Publisher
identifier
226471SE
Digital Object Identifier (DOI)
International Standard Book Number (ISBN) 13
9781479941346
start page
77
end page
80